Hunter X-Core-601

Hunter XC

Hover over an image to enlarge

105.30
(VAT included)
In stock
+
110520206
Manufacturer:Hunter
Τύπος Προγραμματιστή:Ρεύματος
Αριθμός προγραμμάτων:2 έως 8
Εσωτερικού χώρου:
Εξωτερικού χώρου:
Κεντρική βαλβίδα / Εκκίνηση Αντλίας:
Εποχιακή Ρύθμιση:
Προγραμματισμός καθυστέρησης σε βροχή:
Αισθητήρας παράκαμψης βροχής:
Πότισμα με Μονές / Ζυγές ημερομηνίες:
Πότισμα με διαλείματα:
Προγραμματισμός καθυστέρησης μεταξύ στάσεων:
Πρόγραμμα δοκιμής:
Μη πτητική μνήμη:
  • Number of stations: 6
  • Type: Fixed
  • Enclosures: Outdoor
  • Independent programs: 3
  • Start times per program: 4
  • Max. station run time: 4 hrs

 

EASY RETRIEVE™ MEMORY

A manual back-up utility that stores complete controller scheduling and setup information in back-up memory. This allows the saved watering schedule to be restored at any time. This can be used to set a controller back to its initial settings after tampering or at the beginning of a new season.

 

PROGRAMMABLE RAIN DELAY

The Programmable Rain Delay feature incorporates a user specified number of days to keep the controller in the OFF mode, then allows for the system to automatically revert back to scheduled irrigation. This will prevent watering during an extended period of inclement weather, but will resume watering automatically without requiring a return visit to the controller. The controller displays the number of days remaining before watering resumes.

 

QUICK CHECK™

The QuickCheck feature makes field wiring issues easy to assess with the push of a button. QuickCheck displays an ERR message when a field wiring short is detected on a particular station number.

 

NON-VOLATILE MEMORY

This feature offers protection against unreliable power, retaining current time, date, and program data.

 

AUTOMATIC SHORT CIRCUIT PROTECTION

Automatic short circuit protection is a feature found in all Hunter AC powered controllers. This feature automatically detects electrical faults, which are typically caused by wiring issues. Only affected stations are skipped, allowing all other stations to water normally as programmed. There are no fuses to blow or internal circuit breakers to trip, so complete irrigation system shutdown is avoided.

 

SEASONAL ADJUSTMENT: GLOBAL OR AUTOMATIC UPDATES WITH SOLAR SYNC

This feature allows for quick adjustments to irrigation run times through a percentage scale. During peak season, set the seasonal adjustment to 100%. If weather conditions require less water, enter the appropriate percentage value (i.e. 50%) to cut down irrigation run times without the need to adjust each station in the program.  This model offers two different ways to use Seasonal Adjustment to reduce water usage: Global and Daily.

Global: The Global option provides a Seasonal Adjustment percentage to all station Run Times on all of the controller's Programs.

Daily: With the addition of a Solar Sync ET Sensor, the controller has the ability to automatically implement daily adjustments based on measured local weather.

 

DELAY BETWEEN STATIONS

Users can program a delay between stations as the controller advances from one station to the next. This delay can range from a few seconds (to permit slow-closing valves additional time to close) to a much longer period of time (to allow pressure tanks time to recharge), based on user requirements.

 

SENSOR PROGRAMMABILITY

The ability to specify which program or stations will be shut down in response to a specific sensor alarm. This allows stations or programs unaffected by the sensor to continue automatic operations.



Electrical Specifications

  • Transformer input: 120 VAC or 230 VAC
  • Transformer output (24 VAC): 1 A
  • Station output (24 VAC): 0.56 A
  • Pump/master valve (24 VAC): 0.28 A
  • Sensor inputs: 1

 

No posts found

Write a review