Hunter I-20

Hunter I-20 rotor

Hover over an image to enlarge

16.15
(VAT included)
In stock
+
110220601
Manufacturer:Hunter
Τύπος Εκτοξευτήρα:Γραναζωτός
Radius:7m έως 14m
Inlet Size / Type: 1/2" Θυληκό
Nozzles:Ακροφύσια Αφαιρούμενα
Συμβατα στόμια:Σειρά ακροφυσίων μοντέλου
Αθλητικά Στάδια:
Ανακυλωμένο νερό:
  • Arc setting: 50 to 360 degrees
  • Factory installed rubber cover
  • Through-the-top arc adjustment
  • Quick check arc mechanism
  • Water lubricated gear-drive

 

AUTOMATIC ARC RETURN

This patented feature returns the turret to the original arc regardless of where it is turned. This ensures vandal protection in any environment.

 

NON-STRIPPABLE DRIVE

The patented, non-strippable, vandal proof drive mechanism enables the turret to be turned without causing damage.

 

PART- AND FULL-CIRCLE IN ONE MODEL

Patented non-reversing 360 for part- and full-circle in one model, from 50 to 360 degrees.

 

HEADED AND SLOTTED SET SCREW

Use a slotted screwdriver or the Hunter wrench for easier and simpler adjustments as needed.

 

FLOSTOP® CONTROL

FloStop closes the flow of water from individual sprinkler heads while the system is running. This is ideal for changing nozzles or turning off specific heads during maintenance and construction.

 

DRAIN CHECK VALVE (UP TO 3.0 M OF ELEVATION)

As air in the system piping can cause long-term damage to rotors and plumbing, the drain check valve keeps lines from draining when the system is shut off. This saves water, reduces liability, and increases system life.



Operating Specifications

  • Radius: 4.9 to 14.0 m
  • Flow Rate: 0.07 to 3.23 m3/hr  1.2 to 53.8 l/min
  • Recommended pressure range: 1.7 to 4.5 bar; 170 to 450 kPa
  • Operating pressure range: 1.4 to 7 bar; 140 to 700 kPa
  • Precipitation rates: 10 mm/hr approx.
  • Nozzle trajectory: Std = 25 degrees, Low angle = 13 degrees

 

Operating Specifications

  • Manufacturer:
  • Model:
  • Inlet Size/Type:
  • Arc:
  • Radius:
  • Flow Rate:
  • Recommended pressure range:
  • Operating pressure range:
  • Precipitation rates:
  • Nozzle trajectory:

Hunter Industries
I-20
3/4 inch female inlet BSP
50 to 360 degrees
5 to 14 m (17 to 46 feet)
1.3 to 53.8 lpm (0.36 to 14.8 gpm)
2.1 to 4.8 bar (25 to 70 psi)
1.4 to 6.9 bar (20 to 100 psi)
10mm/hr approx. (0.4 in/hr)
Std = 25 degrees, Low angle = 13 degrees

I-20 Models Chart

 

I-20-00

I-20-04

I-20-06

I-20-12

Overall Height:
20 cm (7-3/4")
18 cm (7-1/8")
25 cm (9-7/8")
43 cm (17")
Pop-up Height:
N/A
10 cm (4")
15 cm (6")
30 cm (12")
Exposed Diameter:
4.5 cm (1-3/4")
4.5 cm (1-3/4")
4.5 cm (1-3/4")
4.5 cm (1-3/4")
Inlet Size:
3/4" Female BSP
3/4" Female BSP
3/4" Female BSP
3/4" Female BSP
Possibly you may be interested